LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1992 >> Cutlass Supreme Base >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Anti-Lock Brake System >> Bleeding Brake System >> Manual Bleeding >> Brake Cylinder/Caliper

Brake Cylinder/Caliper

  1. Clean master cylinder reservoir cover and surrounding area. Ensure reservoir is full. Raise and support vehicle. Attach a clear hose to right rear bleeder valve, and submerge other end of hose in container of brake fluid.
  2. Open bleeder valve. Slowly depress brake pedal. Close bleeder valve, and release brake pedal. Repeat process until no air bubbles are seen in hose. Repeat procedure on left rear, right front and left front bleeder valves. Ensure reservoir is full.
scientia non olet · About LEMON Manuals