LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1966 >> Toronado Base, Not Available Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Removal >> CADILLAC >> 1966-67 (Exc. ELDORADO)

1966-67 (Exc. ELDORADO)

NOTE: Transmission and engine must be removed as an assembly.
  1. Raise car, disconnect battery, remove air cleaner, and drain cooling system. Unbolt air conditioner compressor and move to side without disconnecting hoses. Disconnect cooler lines and hoses and remove radiator.
  2. Remove fan assembly and pulley. Unbolt power steering and move to side without disconnecting hoses. Remove exhaust crossover pipe. Disconnect idler arm support from frame and move idler arm to one side.
  3. Disconnect all lines, wiring, and linkage to engine and transmission. Remove two front engine support mount to frame stud nuts. Disconnect propeller shaft and remove hood. Support rear of transmission to take load from engine rear support crossmember. Disconnect and remove engine rear support crossmember.
  4. On cars with A.I.R., make scribe marks on crankshaft pulley, spacer, and harmonic balancer, then remove six screws and remove crankshaft pulley. Remove four screws in air pump pulley and remove pulley.
  5. Remove engine compartment struts. Support engine with cable under intake manifold and remove support from under transmission. Tilt rear of engine down and lift engine and transmission from car.
scientia non olet · About LEMON Manuals