Diagnosis Procedure

EPS warning lamp does not turn OFF several seconds after engine started.

1. PERFORM SELF DIAGNOSTIC RESULT 

   CONSULT

   Select "Self Diagnostic Result" mode of "EPS/DAST 3".

   Is any DTC detected?

   YES

   Check the DTC. Refer to DTC Index .

   NO

   GO TO 2.

2. CHECK POWER STEERING WARNING LAMP 

   Perform the trouble diagnosis of power steering warning lamp. Refer to Component Function Check .

   Is the inspection result normal?

   YES

   GO TO 3.

   NO

   Repair or replace malfunctioning components.

3. EPS CONTROL UNIT POWER SUPPLY AND GROUND CIRCUIT 

   Perform the trouble diagnosis of EPS control unit power supply and ground. Refer to Diagnosis Procedure .

   Is the inspection result normal?

   YES

   Check that the pin terminals and the connection of each connector are normal.

   NO

   Repair or replace malfunctioning components.