Diagnosis Mode
- Connect CONSULT.
- If no DTCs are detected on "SELF-DIAG RESULTS [CURRENT]", repair of SRS is completed. Go to step 4.
If any DTCs are detected on "SELF-DIAG RESULTS [CURRENT]", the malfunction has not been repaired completely or another malfunction is being detected. Select "Self Diagnostic Result""AIR BAG" again.
- Touch "ERASE".NOTE: Touching "ERASE" will clear the SRS memory of the malfunction ("SELF-DIAG [PAST]"). If "SELF-DIAG [PAST]" is not erased, User Mode may show the previous system malfunction even if the malfunction has been repaired completely.
- Check that no malfunction is detected in "SELF-DIAG [PAST]".
- Exit Diagnosis Mode and disconnect the CONSULT.