| 1. |
TCM |
- TCM transmits the signal related to CVT control to ADAS control unit via CAN communication.
- Refer to TCM
for detailed installation location.
|
| 2. |
ECM |
Refer to COMPONENT LOCATION
. |
| 3. |
BCM |
Refer to COMPONENT LOCATION
(with Intelligent Key system) or COMPONENT LOCATION
(without Intelligent Key system). |
| 4. |
ABS actuator and electric unit (control unit) |
- ABS actuator and electric unit (control unit) transmits the vehicle speed signal (wheel speed), stop lamp signal and VDC/TCS/ABS system operation condition to ADAS control unit via CAN communication.
- ABS actuator and electric unit (control unit) controls the brake, based on a brake fluid pressure control signal received from ADAS control unit via CAN communication.
- Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS
for detailed installation location.
|
| 5. |
ICC brake hold relay |
Refer to ICC BRAKE HOLD RELAY . |
| 6. |
ICC sensor |
Refer to ICC SENSOR . |
| 7. |
Front LH wheel sensor |
Refer to WHEEL SENSOR AND SENSOR ROTOR . |
| 8. |
Brake fluid level switch |
Refer to BRAKE FLUID LEVEL SWITCH . |
| 9. |
Brake pedal position switch |
Refer to BRAKE PEDAL POSITION SWITCH / STOP LAMP SWITCH . |
| 10. |
ADAS control unit |
|
| 11. |
VDC OFF switch |
Refer to VDC OFF SWITCH . |
| 12. |
Combination meter |
- Performs the following operations using the signals received from the ADAS control unit via the CAN communication:
- Displays the FEB system operation status using the meter display signal
- Illuminates the FEB warning lamp using the FEB warning lamp signal
|
| 13. |
Steering angle sensor |
Refer to STEERING ANGLE SENSOR . |
| 14. |
Parking brake switch |
Refer to PARKING BRAKE SWITCH . |
| 15. |
Rear LH wheel sensor |
Refer to WHEEL SENSOR AND SENSOR ROTOR . |