Diagnosis Procedure
- ADJUST THE NEUTRAL POSITION OF STEERING ANGLE SENSOR
Perform neutral position adjustment of steering angle sensor. Refer to "WORK PROCEDURE ".
: GO TO 2.
- CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
With CONSULT
Perform self-diagnosis for "ABS".
Is DTC "C1144" detected?
YES: GO TO 3.
NO: INSPECTION END
- CHECK STEERING ANGLE SENSOR SYSTEM
- Turn the ignition switch OFF.
- Check steering angle sensor system. Refer to
"DIAGNOSIS PROCEDURE ".
Is the inspection result normal?
YES: Replace ABS actuator and electric unit (control unit). Refer to "REMOVAL AND INSTALLATION ".
NO: Repair or replace error-detected parts.