Diagnosis Procedure
- PERFORM INITIALIZATION PROCEDURE
Initialization procedure is executed and operation is confirmed.
Refer to "WORK PROCEDURE ".
Is the inspection result normal?
YES: INSPECTION END
NO: GO TO 2.
- CHECK ENCODER CIRCUIT
Check encoder circuit.
Refer to "DIAGNOSIS PROCEDURE ".
Is the inspection result normal?
YES: GO TO 3.
NO: Repair or replace the malfunctioning parts.
- REPLACE POWER WINDOW MAIN SWITCH
- Replace power window main switch.
- Confirm the operation after replacement.
Is the inspection result normal?
YES: Inspection End.
NO: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".