Steering Outer Socket and Inner Socket

TORQUE SPECIFICATION

Steering gear type		R24K
Outer socket ball stud	Swinging torque	0.3 - 2.9 N.m (0.03 - 0.29 kg-m, 3.0 - 25 in-lb)
	Measurement on spring balance Measuring point: ball stud upper side	6.0 - 58 N (0.61 - 5.91 kg-f, 1.35 - 13.03 lb-f)
	Axial end play	0.5 mm (0.020 in) or less
Inner socket ball joint	Swinging torque	0.5 - 5.0 N.m (0.06 - 0.51 kg-m, 5 - 44 in-lb)
	Measurement on spring balance Measuring point at *mark shown	4.3 - 43.5 N (0.44 - 4.44 kg-f, 0.97 - 9.79 lb-f)
	Axial end play	0.2 mm (0.008 in) or less
Inner socket length "L"		57.8 mm (2.276 in)
Courtesy of NISSAN MOTOR CO., U.S.A.