LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Quest SE >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> VDC/TCS/Abs >> Trouble Diagnosis >> CONSULT-III Function (ABS) >> Active Test >> Operation Procedure

Operation Procedure

  1. Connect the CONSULT-III and CONSULT-III CONVERTER to the data link connector and start the engine.
    CAUTION: If CONSULT-III is used with no connection of CONSULT-III CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carries out CAN communication.
  2. Touch "ABS".

    If "ABS" is not indicated, go to "CONSULT-III DATA LINK CONNECTOR (DLC) CIRCUIT ".

  3. Touch "ACTIVE TEST".
  4. The "SELECT TEST ITEM" screen is displayed.
  5. Touch necessary test item.
  6. With the "MAIN SIGNALS" display selected, touch "START".
  7. The Active Test screen will be displayed, so conduct the following test.
scientia non olet · About LEMON Manuals