LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2006 >> Altima SE-R, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Brake Control System >> Abs >> Actuator And Electric Unit (Assembly) >> Removal and Installation >> Installation

Removal and Installation: Installation

CAUTION: After installation of ABS actuator and electric unit (control unit), refill brake fluid. Then bleed air from system. Refer to , "BLEEDING BRAKE SYSTEM ".
  1. Assemble ABS actuator and electric unit (control unit) and bracket assembly, then position assembly in vehicle.
  2. Install and tighten bracket bolts.
  3. Install brake pipes to ABS actuator and electric unit (control unit), then tighten flare nuts. Refer to , "HYDRAULIC CIRCUIT ".
  4. Connect ABS actuator and electric unit (control unit) harness connectors.
  5. Install windshield wiper motor and linkage assembly. Refer to , "INSTALLATION ".
  6. Reconnect battery negative terminal.
scientia non olet · About LEMON Manuals