LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2005 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Seats) >> Service Information >> Front Seat >> Disassembly and Assembly >> Seat Cushion Trim And Pad >> Notes

Seat Cushion Trim And Pad: Notes

WARNING: This page is about a different car, the 2009 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Lifter Lever Cover, Seat Cushion Outer Finisher And Lifter Lever
G05925959Courtesy of NISSAN MOTOR CO., U.S.A.
CAUTION:
  • Front passenger seat is equipped with an Occupant Detection System sensor and control module. Do not disassemble front passenger seat cushion assembly or remove the trim as this will affect the Occupant Detection System calibration.
  • During installation, the wire harness clips must be installed in the holes they were originally in. Do not add additional clips.
  • When removing or installing the seat trim, handle it carefully to keep dirt out and avoid damage.
scientia non olet · About LEMON Manuals