Inspection Procedure
- SELF-DIAGNOSIS RESULT CHECK
Check self-diagnosis results.
Self-diagnosis results
ENGINE SIGNAL 1
ENGINE SIGNAL 2
ENGINE SIGNAL 3
ENGINE SIGNAL 4
ENGINE SIGNAL 6
Is the above displayed in the self-diagnosis display items?
- YES: GO TO 2.
- NO: Inspection End.
- ENGINE SYSTEM INSPECTION
- Perform ECM self-diagnosis and repair as necessary. Refer to SELF-DIAG RESULTS MODE .
- Perform ABS actuator and electric unit (control unit) self-diagnosis again.
OK or NG
- OK: Inspection End.
- NG: Repair or replace as necessary