LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Servicing A/T) >> Removal & Installation >> Valve Body Assembly >> Removal

Valve Body Assembly: Removal

WARNING: This page is about a different car, the 2003 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove drain plug with gasket and drain automatic transmission fluid.
  3. Remove oil pan. See DRAINING & REFILLING .
  4. Remove oil filter. See DRAINING & REFILLING .
  5. Remove solenoid valve wiring with ATF temperature sensor using the following steps:
    1. Disconnect ATF temperature sensor.
    2. Remove bolt and clamp. See Figure.
    3. Disconnect 7 connectors from solenoid valves.
  6. Remove 21 bolts to remove valve body. See Figure.
  7. Remove check ball body and spring. See Figure.
  8. Remove solenoid valves using the following steps:
    1. Remove 4 bolts and solenoid valves No. 1, 2, 3 and 4.
    2. Remove bolt, lock plate, and solenoid valve SLN.
    3. Remove 2 "O" rings from solenoid valves No. 2 and 4.
    4. Remove bolt, lock plate and solenoid valves SLU and SLT. See Figure.
scientia non olet · About LEMON Manuals