LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different car >> Section 1854 (Maintenance) >> Chassis And Body Maintenance >> Checking Transfer Fluid >> Fluid Leakage And Fluid Level

Fluid Leakage And Fluid Level

WARNING: This page is about a different car, the 2006 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make sure that fluid is not leaking from the transfer assembly or around it.
  2. Check fluid level from the filler plug hole as shown.
    CAUTION: Do not start engine while checking fluid level.
  3. Install the filler plug with a new gasket to the transfer. Tighten to the specified torque. Refer to "COMPONENTS ".
CAUTION: Do not reuse gasket.
Fig 1: Checking Fluid Level From Filler Plug Hole
G04206017Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals