LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima SL, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System - 2.5L >> DTC P1800: VIAS Control Solenoid Valve >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for at least 5 seconds.
  4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "
    Fig 1: Displaying DATA MONITOR Mode
    G02884869Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals