LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 831 (Automatic Transmission) >> On Vehicle Service >> Park/Neutral Position Switch Adjustment

Park/Neutral Position Switch Adjustment

WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove manual control linkage from manual shaft of A/T assembly.
  2. Set manual shaft of A/T assembly in "N" position.
  3. Loosen PNP switch fixing bolts.
  4. Insert pin into adjustment holes in both PNP switch and manual shaft of A/T assembly as near vertical as possible.
    5. Fig 1: Inserting Pin Into Adjustment Holes In Both PNP Switch And Manual Shaft Of A/T Assembly
    G02033144Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Reinstall any part removed.
  6. Check continuity of PNP switch. Refer to "Component Inspection ".
scientia non olet · About LEMON Manuals