LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 524 (Engine Control System - Sedan) >> DTC P1121: Electric Throttle Control Actuator >> DTC Confirmation Procedure >> Procedure For Malfunction A And B >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2005 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON and wait at least 1 second.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Set shift lever to D position (A/T) or 1st position (M/T), and wait at least 3 seconds.
  4. Set shift lever to P position (A/T) or Neutral position (M/T).
  5. Turn ignition switch OFF and wait at least 10 seconds.
  6. Turn ignition switch ON and wait at least 1 second.
  7. Set shift lever to D position (A/T) or 1st position (M/T) and wait at least 3 seconds.
  8. Set shift lever to P position (A/T) or Neutral position (M/T).
  9. Turn ignition switch OFF, wait at least 10 seconds, and then turn ON.
  10. If DTC is detected, go to "Diagnostic Procedure ".
    Fig 1: Selecting "DATA MONITOR" Mode With CONSULT-II
    G02348740Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals