LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1701 (Body, Lock & Security System) >> Door >> Removal and Installation >> Rear Door

Rear Door

WARNING: This page is about a different car, the 2006 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the door finisher. Refer to "DOOR FINISHER "
  2. Remove the inner seal.
  3. Remove the rear door glass and regulator. Refer to "REAR DOOR GLASS AND REGULATOR "
  4. Remove the door harness.
  5. Remove the check link bolt from the hinge pillar.

    Check link to hinge pillar bolt 14.7 N.m (1.5 kg-m, 11 ft-lb) 

    Fig 1: Removing Check Link Bolt From Hinge Pillar
    G04175864Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Remove the door-side hinge nuts, and remove the door assembly.

    Door hinge nuts 24.5 N.m (2.5 kg-m, 18 ft-lb) 

    Installation is in the reverse order of removal.

    Fig 2: Identifying Door-Side Hinge Nuts
    G04175865Courtesy of NISSAN MOTOR CO., U.S.A.