Removal and Installation: Removal
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Set the front wheels in the straight-ahead position.
- Remove the driver air bag module. Refer to "REMOVAL AND INSTALLATION ".
- Disconnect the steering wheel switches and heated steering wheel connector.
- Remove the steering wheel center nut.
- Remove the steering wheel, using Tools.
Tool number A: KV481J0010 (J-1859A)
B: KV481J0020 (J-42578)
- Inspect the steering wheel near the puller holes for damage. If damage is found, replace the steering wheel.
- Remove the steering wheel rear cover and steering wheel switches, if required.
CAUTION: Place a piece of tape across the spiral cable so it will not be rotated out of position.