Basic Inspection 3 Abs Warning Lamp, VDC Off Indicator Lamp, Slip Indicator Lamp Inspection
WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- Check that ABS warning lamp, VDC OFF indicator lamp (when VDC OFF switch is OFF), and SLIP indicator lamp turns ON when ignition switch is turned ON. If they do not, check the VDC OFF indicator lamp and then VDC OFF switch. Refer to "VDC OFF SWITCH ". Check CAN communications. Refer to "INSPECTION 13 CAN COMMUNICATION SYSTEM ". If there are no errors with VDC OFF switch and CAN communication system, check ABS warning lamp, VDC OFF indicator lamp, SLIP indicator lamp and combination meter. Refer to "COMBINATION METERS ".
- Make sure the lamp turns OFF after ignition switch is turned ON. If the lamp does not turn OFF, conduct self-diagnosis.
- With engine running, make sure VDC OFF indicator lamp turns ON and OFF when VDC OFF switch is turned ON and OFF. If the indicator lamp status does not correspond to switch operation, check VDC OFF switch system. Refer to "VDC OFF SWITCH ".
- Make sure ABS warning lamp, VDC OFF indicator lamp, and SLIP indicator lamp turns OFF 2 seconds after engine is started. If ABS warning lamp, VDC OFF indicator lamp, and SLIP indicator lamp have not turned off 10 seconds after engine has been started, conduct self-diagnosis of ABS actuator and electric unit (control unit).
- After conducting self-diagnosis, be sure to erase the error memory. Refer to "CONSULT-II FUNCTIONS ".