Component Inspection

WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.

CHECK IGNITION RELAY-1

Electric motor switch to OFF.
Remove ignition relay-1.

Check continuity between ignition relay-1 terminals.

Ignition relay-1		Condition	Continuity
Terminal		Condition	Continuity
3	5	12 V direct current supply between terminals 1 and 2.	Existed
3	5	No current supply	Not existed

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Is the inspection result normal?

YES >>

INSPECTION END

NO >>

Replace ignition relay-1.