LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2024 >> Eclipse Cross SE >> Repair and Diagnosis >> Brakes >> Traction Control >> Active Stability Control System (ASC) >> Hydraulic Unit >> Removal And Installation >> Installation Service Point >> >>A<< Brake Tube Connection

>>A<< Brake Tube Connection

CAUTION: After connecting the brake pipe, check that the brake pipe is secured into the vehicle body side fixing clips.

Install the brake pipe to the hydraulic unit as shown in the figure below.

  1. From master cylinder (primary)
  2. From master cylinder (secondary)
  3. To front brake (RH)
  4. To front brake (LH)
  5. To rear brake (LH)
  6. To rear brake (RH)
G12649432Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals