LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2013 >> Lancer Evolution MR >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Active Stability Control System (ASC) - Lancer Evolution >> Hydraulic Unit >> Removal And Installation >> Installation Service Point >> >>A<< Brake Tube Connection

>>A<< Brake Tube Connection

Install the brake pipe to the hydraulic unit as shown in the illustration below.

  1. From master cylinder (primary)
  2. To front brake (RH)
  3. To front brake (LH)
  4. From master cylinder (secondary)
  5. To rear brake (RH)
  6. To rear brake (LH)
    Fig 1: Brake Tube Connection
    G06675323Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals