Section 47 (General Orphan Data (2 Of 2) (F57))
WARNING: This page is about a different variant/trim than selected.
- (Removing and installing/replacing left or right actuator (active pedestrian protection))
- (Trunk lid)
- (Remove or install front or rear wheel)
- (Cord for separating adhesions)
- (Install bumper cover, front)
- (Bumper, rear)
- (Removing the left and right tail lights)
- (Install the left and right tail lights)
- (Battery with terminal)
- (Remove left and right wiper blade)
- (Install the left and right wiper blade)
- (Trim elements, covers, trunk lid handle)
- (Mirrors, Decorative strips, Ashtrays, Consoles)
- (Remove mirror glass)
- (Installing the mirror glass)
- (Vacuum lifting tool, Hazet)
- ("Spider" dismantling system for bonded glazing)
- (Wire pull handle with suction element)
- (Pinchweld scraper set)
- (Remove the windshield)
- (Dashboard protection for vehicle window removal)
- (Wire starter for window final assembly)
- (Front power electric windows)
- (Removing and installing/replacing the window channel strip on the outside of the front door)
- (Removing and installing/replacing the window channel strip on the inside of the front door)
- (Operate electrical side window)
- (Removing and installing or replacing inside door opener in left or right front door)
- (Side trim panel with armrest)
- (Safety belt)
- (Trim panel, instrument panel)
- (Luggage compartment trim panel)
- (Passenger compartment trim panel)
- (Gaskets and loose body parts)
- (Body reinforcement)
- (Front seats)
- (Universal seat mount - May 2023 update)
- (Removing and installing front seat, passenger's side)
- (Airbag modules)
- (Removing seat cover with cushion)
- (Installing the seat cover with cushion)
- (Removing the backrest cover with the cushion)
- (Installing the backrest covering with the cushion)
- (Rear seats)
- (Removing both seals on the roof frame at the rear)
- (Remove auxiliary brake light)
- (Removing both trim strips from the convertible top)
- (Removing both outer window channel strips for the rear side window glass)
- (Installing both seals on the roof frame at the rear)
- (Install the trim strips on the convertible top and auxiliary brake light)
- (Final checks)
- (Removing the trim panel for the guide rail)
- (Adjusting the seal of the roof frame)
- (Install the trim panel for the guide rail)
- (Open loading aid)
- (Closing the loading aid)
- (Removing both convertible top brace locks)
- (Installing both convertible top brace locks)
- (Remove both trim panels for the guide rails)
- (Removing both interior trim panels of the guide rails)
- (Installing both interior trim pieces for the guide rails)
- (For replacement: Remount both front gaskets)
- (Installing both trim panels for the guide rails)
- (Removing both convertible top drive units)
- (Attach the convertible top to the convertible top storage tray)
- (Close the convertible top manually on the convertible top storage tray)
- (Open the convertible top manually on the convertible top storage tray)
- (Remove the convertible top from the convertible top storage tray)
- (Installing both convertible top drive units)
- (Remove the seat belt finisher strip)
- (Remove roll-over protection system)
- (Remove the trim panel of the roll bar on the side)
- (Detach the rear seat belt)
- (Removing the release unit for the left or right rear seat backrest)
- (Installing the left or right release unit for the rear seat backrest)
- (Secure the rear seat belt)
- (Install the trim panel of the roll bar on the side)
- (Retracting the rollover protection system)
- (Install the seat belt finisher strip)
- (Crimping tool for repairing the coaxial line RTK031)
- (Safety instructions for handling electric and hybrid vehicles)
- (Recording of spare parts (housings and contacts) from "Repair set 4 for vehicle electrical system" All)
- (New universal crimping die All)
- (New crimping pliers and interchangeable dies All)
- (New "MultiStrip 10" insulation strippers)
- (New release tools for electrical contacts All)
- (New release tools and insertion aids for electrical contacts All/t>)
- (New release tools for electrical contacts MINI)
- (New release tool for electrical contacts MINI)
- (Wiring harness repair kit 4.0 (61 13 4 470 939) and associated special tools)
- (Notes on diagnostics)
- (F60Power distribution box, current terminals)
- (Disconnecting and connecting battery ground lead)
- (switch)
- (Fanfare horn)
- (Enclosure 1 to SWS 01 08 09 (531))
- (New main number for the antistatic mat)
- (Replacing the gel pad for rain light solar mist sensor)
- (Windshield wiper system, front)
- (Instrument panel)
- (Head-Up Display (F 5x))
- (Sealing all ventilation elements on the headlight)
- (Preparing the headlight internal pressure test)
- (Remove butyl on the headlight)
- (Fitting ventilation elements on the headlight)
- (Fog lights, marker light)
- (Rear light)
- (Interior lights, MINI, F5x/F60)
- (Fog light, additional high-beam headlight, MINI, F5x)
- (Rear fog lights, MINI, F5x)
- (Turn signals, MINI, F5x/F60)
- (Removing and installing/replacing instrument panel trim, bottom right)
- (Removing the instrument cluster (KOMBI))
- (Removing the ring trim)
- (Installing the ring trim)
- (Installing the instrument cluster (KOMBI))
- (Remove side center console trim panel)
- (Air conditioning, refrigerant amounts, BMW, F20, F21, F22, F23, F30, F31, F32, F33, F34, F35, F36, F54, F55, F56, F57, F80, F82, F83, F87)
- (Draw off and dispose of contaminated refrigerant R1234yf)
- (R134a Air-conditioning system servicing device Beissbarth A/Ccellence 2500)
- (Store tools)
- (Refrigerant Lines and Expansion Valve)
- (Air conditioning compressor)
- (Radio)
- (Loudspeakers)
- (Airbag control unit)
- (Control of airbag deployment)
- (Removing and installing/replacing door lock in left or right front door)
- (Removing and installing/replacing left or right trunk lid lock)