LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Steering Column >> Steering Wheel Leather Cover Is Peeling (M32 01 11)

Steering Wheel Leather Cover Is Peeling (M32 01 11)

Publication date: 2011-05-01
Reference number: M32 01 11

STEERING WHEEL LEATHER COVER IS PEELING

STEERING WHEEL LEATHER COVER IS PEELING

TECHNICAL SERVICE BULLETIN

Reference Number(s): SI M32 01 11, Date of Issue:  May 2011
MINI: All Models
GROUP: Steering and Wheel Alignment

SUBJECT

Steering Wheel Leather Cover Is Peeling 

SITUATION

The steering wheel leather is peeling away from the rear side of the steering wheel.

CAUSE

The adhesive application is poor or insufficient.

CORRECTION

Apply instant adhesive to the affected areas.

PROCEDURE

Refer to the attachment below .

Replacement of the complete steering wheel for this peeling issue will not be accepted by warranty. 

PARTS INFORMATION

PARTS INFORMATION

Part Number Description Quantity
Loctite 454 (sourced locally) Instant adhesive As needed

WARRANTY INFORMATION

Covered under the terms of the MINI New Passenger Car Limited Warranty as applicable.

WARRANTY INFORMATION

Defect Code: 32 33 06 68 00  
Labor Operation: Labor Allowance: Description:
32 33 000 Refer to KSD2 Removing and installing steering wheel
or    
32 33 010 Refer to KSD2 Removing and installing sport steering wheel
and    
32 99 000 1 FRU Work time to complete the repair procedure
Sublet Code 4 $1.00 Reimbursement of up to the amount listed may be charged to sublet code 4 for the Loctite 454 instant adhesive required to perform this repair. Claiming this part number outside of sublet code 4 will result in a delayed or denied claim payment.

Labor operation codes 32 33 000 and 32 33 010 are main labor operations, if you are using a main labor code for another repair; use the corresponding plus code labor operation 32 33 500 or 32 33 510 instead.

Even though labor operation code 32 99 000 ends in "000"; it has a designated FRU allowance, and as described above, it is not considered a main labor operation.

Please refer to the Warranty Policy and Procedures Manual regarding proper support, documentation and archiving required for claims, as applicable

ATTACHMENTS

G08586148
G08586149