Steering Gear (Complete): Remove & Replace

Includes: Adjust toe-in on Rack and Pinion type Steering Gears. NOTE: Deduct .4 if alignment is also performed.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
		4.5	3.8	B
Additional Procedure: STEERING GEAR (COMPLETE): Remove & Replace:
If necessary to Bleed System add		0.4		B
Combination Procedure: RACK & PINION BOOT: Remove & Replace:
Each		0.3		B
Combination Procedure: SECTOR SHAFT SEAL: Remove & Replace:
		0.4		B
Combination Procedure: STEERING GEAR: Overhaul: Includes: Bleed System.
		2.4		B
Combination Procedure: STEERING INPUT SHAFT SEAL: Remove & Replace:
		0.6		B
Combination Procedure: TIE ROD &/OR END: Remove & Replace:
Each		0.2		B