Remove/Install Supplemental Restraint System Control Unit - AR91.60-P-0624RG
Model 190
MODIFICATION NOTES
| 17.05.2017 | Initial startup added. |
| Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical component parts to temperatures above 100°C or 212°F. Disconnect current supply when working on such component parts. | AS91.00-Z-0008-01A | |
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
| 2 | Open engine hood and move to vertical position | AR88.40-P-1000RG | |
| 3 | Attach front cover for magnesium radiator cross member | ||
| 000 588 05 98 00 Cover | When working in the engine compartment, the front cover for the magnesium radiator cross member must be fitted into place to protect the magnesium radiator cross member. Otherwise, the surface coating on the radiator cross member made of magnesium may be damaged. |
WS98.00-P-0011B | |
| 4 | Detach ground line of on-board electrical system battery | AR54.10-P-0003RG | |
| 5 | Remove cover on center console | AR68.20-P-2350RG | |
| 6 | Separate electrical connections (1) | ||
| 7 | Unscrew nuts (2) | ||
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| *BA91.60-P-1009-01N | |||
| 8 | Remove supplemental restraint system control unit (N2/10) | ||
| 9 | Install in the reverse order | ||
| Initial startup | |||
| 10 | Perform initial startup of supplemental restraint system control unit (N2/10) | When replacing supplemental restraint system control unit (N2/10). | |
| AD00.00-P-2000-04B |
AIRBAG
| Number | Designation | Model 190 | |
|---|---|---|---|
| BA91.60-P-1009-01N | Nut, airbag control unit on tunnel | Nm | 9 |