Remove/install crankshaft Hall sensor - AR15.12-P-2136GW
ENGINES 157 in MODEL 463
| Remove/install | |||
| Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| 1 | Open engine hood and move to vertical position | AR88.40-P-1000GG | |
| 2 | Switch off ignition | ||
| 3 | Remove air plenum chamber and water collector | AR83.10-P-9998GW | |
| 4 | Detach electrical connector at crankshaft Hall sensor (B70) | ||
| 5 | Remove crankshaft Hall sensor (B70) with intermediate flange (2); to do this remove screw/bolt (1s) | *BA15.10-P-1001-03E | |
| 6 | Install in the reverse order | ||
| 7 | Read out fault memory with STAR DIAGNOSIS and erase if necessary | AD00.00-P-2000-04A | |
| Checking | |||
| Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. |
AS00.00-Z-0005-01A | |
| 8 | Carry out engine test run |
POSITION SENSOR
| Number | Designation | Engine 157 | |
|---|---|---|---|
| BA15.10-P-1001-03E | Screw/bolt, crankshaft Hall sensor to crankcase | Nm | 8 |