Automatic Transmission - Testing & Repair - 211 Chassis
- Testing & Repair
- Automatic Transmission Oil Level Inspection (Correct If Necessary) - AR27.00-P-0100W
- Automatic Transmission Oil Level Inspection (Add ATF If Necessary) - AR27.00-P-0101A
- Filling automatic transmission with fluid - AR27.00-P-0270W
- Remove/install transmission with torque converter - AR27.10-P-0500
- Separate/connect transmission oil line - AR27.10-P-0501-03AK
- Remove/install lines at automatic transmission - AR27.10-P-0502-01TS
- Remove/install automatic transmission oil pan - AR27.10-P-7030W
- Remove/install electrohydraulic controller unit (transmission installed) - AR27.19-P-0200
- Disassemble and assemble electrohydraulic control unit - AR27.19-P-0220A
- Replace pilot bushing in the electrohydraulic control unit - AR27.19-P-0230A
- Removing and installing electronic transmission control (ETC) control unit - AR27.19-P-1719T
- Detach/attach torque converter on driver - AR27.20-P-0100-01A
- Remove/install torque converter - AR27.20-P-0500
- Remove/install radial shaft sealing ring at output flange - AR27.40-P-0205
- Remove/install output flange - AR27.50-P-0620
- Disassemble/assemble multi-disk brake B1 - AR27.50-P-0870W
- Dismantling and assembling clutch K1 - AR27.51-P-0800W
- Measure and adjust clearance - AR27.51-P-7229W
- Flush out oil cooler lines and oil cooler - AR27.55-P-0001
- Flush out automatic transmission and converter - AR27.55-P-0100A
- Remove/install oil lines of oil cooling for automatic transmission - AR27.55-P-0600TS
- Remove/install ignition lock control cable - AR27.60-P-0122T
- Remove/install electronic selector lever module (ESM) - AR27.60-P-0901T
- Remove/install selector lever handle with covering - AR27.60-P-0905R
- Remove/install and set shift rod - AR27.60-P-0990T