Automatic Transmission -- Testing & Repair -- 203 Chassis

• Testing & Repair
  • Automatic Transmission Oil Level Inspection (Correct If Necessary) - AR27.00-P-0100W
  • Inspect ATF level in automatic transmission, add ATF if necessary - AR27.00-P-0101P
  • Filling automatic transmission with fluid - AR27.00-P-0270W
  • Remove/install oil pump - AR27.10-P-0400A
  • Disconnecting and connecting plug connector - AR27.10-P-0500-01A
  • Remove/install transmission with torque converter - AR27.10-P-0500P
  • Remove/install transmission with torque converter - AR27.10-P-0500PW
  • Separate/connect transmission oil line - AR27.10-P-0501-03AK
  • Fasten transmission to assembly stand Support plate for mounting transmission - AR27.10-P-0600-01B
  • Fasten transmission on assembly stand - AR27.10-P-0600-01W
  • Remove/install automatic transmission oil pan - AR27.10-P-7030W
  • Insert selector valve into driver of detent plate - AR27.19-P-0200-01A
  • Remove/install electrohydraulic controller unit (transmission installed) - AR27.19-P-0200P
  • Remove/install electrohydraulic controller unit (transmission installed) - AR27.19-P-0200W
  • Disassemble and assemble electrohydraulic control unit - AR27.19-P-0220P
  • Replace pilot bushing in the electrohydraulic control unit - AR27.19-P-0230A
  • Remove/install electronic transmission control (ETC) control unit - AR27.19-P-1719Q
  • Detach/attach torque converter on driver - AR27.20-P-0100-01A
  • Remove/install torque converter - AR27.20-P-0500-01P
  • Remove/install torque converter - AR27.20-P-0500-01W
  • Remove/install radial shaft sealing ring on front transmission cover - AR27.30-P-4970QB
  • Dismantle and assemble shift plate - AR27.35-P-0350A
  • Remove/install radial shaft sealing ring at output flange - AR27.40-P-0205QB
  • Remove/install shift shaft radial shaft sealing ring - AR27.40-P-0220A
  • Remove/install shift shaft radial shaft sealing ring - AR27.40-P-0220B
  • Remove/install oil pump radial shaft sealing ring - AR27.40-P-0300A
  • Remove/install shield at transmission - AR27.40-P-0700-01V
  • Screw on and secure twelve-point collared nut and secure - AR27.50-P-0600-04B
  • Install grooved ball bearing in rear transmission housing - AR27.50-P-0600-05A
  • Measure end play between park pawl gear and grooved ball bearing - AR27.50-P-0600-06A
  • Remove grooved ball bearing in rear of transmission housing - AR27.50-P-0601-01A
  • Detach/attach transmission housing on torque converter housing. - AR27.50-P-0601A
  • Detach/attach transmission housing on torque converter housing. - AR27.50-P-0601W
  • Remove/install main components of the transmission - AR27.50-P-0610W
  • Remove/install K3, rear hollow shaft, rear planet carrier and output shaft - AR27.50-P-0611W
  • Removing/installing drive shaft with K2, front planet carrier, internal plate carrier with K1 and B3 - AR27.50-P-0612W
  • Output flange removal and installation - AR27.50-P-0620-02W
  • Removing and installing multiple-disc clutches K1, K2 and K3 - AR27.50-P-0621A
  • Dismantling and assembling oil pump - AR27.50-P-0720-01A
  • Remove/install multi-disk brake B1 and oil pump - AR27.50-P-0721A
  • Remove/install multi-disk brake B1 and oil pump - AR27.50-P-0721W
  • Inserting and measuring multiple-disc pack B3 - AR27.50-P-0780-11A
  • Removing and installing multi-disk brake B2, disk pack B3 and park pawl gear - AR27.50-P-0781A
  • Remove/install BPC clutch pack, multi-disk brake B2 and park pawl gear - AR27.50-P-0782W
  • Checking and adjusting end play between shim and circlip - AR27.50-P-0810-01A
  • Dismantling and assembling output shaft with center and rear gear set - AR27.50-P-0810A
  • Disassembling and assembling rear hollow shaft with rear freewheel - AR27.50-P-0850A
  • Dismantle and assemble rear tubular shaft - AR27.50-P-0851W
  • Inserting and measuring multi-disk pack B1 Thickness steel multi-disks B1, K1 and K2 changed - AR27.50-P-0870-01A
  • Inserting and measuring multiple-disc pack B1 - AR27.50-P-0870-01AA
  • Dismantling and assembling multi-disk brake B1 - AR27.50-P-0870A
  • Disassemble/assemble multi-disk brake B1 - AR27.50-P-0870W
  • Assembling piston guide and outer multiple disc carrier of multiple-disc brake - AR27.50-P-0880-01A
  • Assembling piston guide and external plate carrier of multi-disk brake B2 - AR27.50-P-0880-01W
  • Inserting and measuring multiple-disc pack B2 - AR27.50-P-0880-02A
  • Dismantling and assembling multiple-disc brake B2 - AR27.50-P-0880A
  • Disassemble/assemble multi-disk brake B2 - AR27.50-P-0880W
  • Disassemble/assemble multi-disk brake B3 - AR27.50-P-0890W
  • Insert and measure multi-disk pack K1 Thickness of steel multi-disks B1, K1 and K2 changed - AR27.51-P-0800-02A
  • Insert and measure multi-disk pack K1 - AR27.51-P-0800-02AA
  • Disassemble/assemble clutch K1 - AR27.51-P-0800B
  • Dismantling and assembling clutch K1 - AR27.51-P-0800W
  • Inserting and measuring multiple-disc pack K2 Thickness of steel discs B1, K1 and K2 revised Additional disc spring in multiple-disc pack K2 - AR27.51-P-0820-02A
  • Disassemble/assemble K2 clutch - AR27.51-P-0820W
  • Dismantling and assembling drive shaft with clutch K2 and front gear set - AR27.51-P-0825A
  • Inserting and measuring multi-disk pack K3 Thickness of friction and steel multi-disks K3 changed - AR27.51-P-0830-01A
  • Inserting and measuring multiple-disc pack K3 - AR27.51-P-0830-01AA
  • Disassemble and assemble clutch K3. - AR27.51-P-0830A
  • Disassemble/assemble clutch K3 - AR27.51-P-0830W
  • Measure and adjust clearance of BR multi-disk brake - AR27.51-P-7229-01W
  • Measure and adjust clearance - AR27.51-P-7229W
  • Flush out oil cooler lines and oil cooler - AR27.55-P-0001A
  • Flushing out oil cooler lines and oil cooler - AR27.55-P-0001PI
  • Flush out automatic transmission and converter - AR27.55-P-0100A
  • Remove/install oil lines of oil cooling for automatic transmission - AR27.55-P-0600P
  • Remove/install ignition lock control cable - AR27.60-P-0122P
  • Removing and installing wire cable / transmission for parking shift lock on transmission - AR27.60-P-0500-05B
  • Remove/install electronic selector lever module (ESM) - AR27.60-P-0901P
  • Remove/install selector lever handle with covering - AR27.60-P-0905P
  • Remove/install selector lever handle with covering - AR27.60-P-0905PA
  • Adjust shift lock - AR27.60-P-0910A
  • Remove/install park pawl mechanism - AR27.60-P-0950A
  • Remove, install park pawl mechanism - AR27.60-P-0950W
  • Adjusting wire cables for parking lock interlock - AR27.60-P-0965B
  • Adjusting shift rod - AR27.60-P-0980P
  • Remove/install shift rod - AR27.60-P-0985Q