DTC Description

Fault Memory & Actuation Of MIL - After 2 consecutive driving cycles with fault.
Frequency Of Testing - Continuous.
Checked Signal Or Status - Limit values of self-adaptation of mixture formation.
Limit Value Of Closed Throttle Position - Approximately plus or minus one millisecond (corresponds to approximately 25 percent of duration of injection at idle).
Limit Value Of Part Load - Factor 0.7-1.3.

NOTE: A trip of approximately 30 minutes with enabled lambda control is required to obtain a new value for the self-adaptation of mixture formation. Engine coolant temperature must be less than 140°F (60°C) when starting.