Rear Axle -- 163 Chassis
- Testing & Repair
- Testing and repair work: Passenger cars: Rear axle - AR35.00-Z-9163AA
- Support rear axle with axle removal device and pit lift or assembly lift - AR35.10-P-0010-07GH
- Remove/install complete rear axle - AR35.10-P-0010GH
- Lower rear axle - AR35.10-P-0020-01GH
- Remove/install front rubber mount for rear axle center assembly suspension - AR35.10-P-0055-01GH
- Remove/install rear rubber mounts for rear axle center assembly suspension - AR35.10-P-0055-02GH
- Checking installed position of rear axle center assembly and if necessary correcting position of front rubber mount - AR35.10-P-0055-03GH
- Remove/install front and rear rubber mounts for rear axle center assembly suspension in rear axle carrier - AR35.10-P-0055GH
- Pressing out and attaching follower joint at wheel carrier - AR35.20-P-0107-01GH
- Replace rubber mount of upper wishbone - AR35.20-P-0107-02GH
- Removing/installing upper wishbone and replacing rubber mount - AR35.20-P-0107GH
- Replace rubber mount of lower wishbone - AR35.20-P-0108-01GH
- Removing/installing lower wishbone and replacing rubber mount - AR35.20-P-0108GH
- Pressing out and attaching track rod joint at wheel carrier - AR35.20-P-0109-01GH
- Remove/install track rod - AR35.20-P-0109GH
- Removing/installing wheel carrier - AR35.20-P-0115GH
- Removing/installing supporting joint on wheel carrier (wheel carrier removed) - AR35.20-P-0117GH
- Pulling out and drawing in rear-axle shaft flange (wheel carrier installed) - AR35.20-P-0130-01B
- Pull bearing inner race off rear axle shaft flange - AR35.20-P-0130-02A
- Remove/install double-row angular ball bearing in wheel carrier - AR35.20-P-0130-03A
- Pulling jammed rear axle shaft flange out and in (wheel carrier removed) - AR35.20-P-0130-04GH
- Remove/install rear axle shaft flange and angular ball bearing - AR35.20-P-0130GH
- Pressing out and drawing in rear axle shaft at rear axle shaft flange - AR35.30-P-0115-03B
- Pressing out and pressing in rear axle shaft - AR35.30-P-0620-01GH
- Remove/install rear axle shaft - AR35.30-P-0620GH
- Driving out and pressing on outer joint - AR35.30-P-0665-01GH
- Detaching and attaching rubber boots at joint - AR35.30-P-0665-02GH
- Replace rubber boots on rear axle shaft - AR35.30-P-0665GH
- Check rear axle differential oil level correct if necessary - AR35.31-P-0520-03GH
- Detaching and attaching rear axle center assembly front suspension - AR35.31-P-0520-04GH
- Detaching and attaching front rear axle center assembly suspension - AR35.31-P-0520-04GI
- Remove/install rear axle differential - AR35.31-P-0520GH
- Measure and note total friction torque on drive pinion - AR35.31-P-0530-04GH
- Unscrewing and screwing on hexagon collared nut and securing with locking plate - AR35.31-P-0530-05GH
- Pressing out and pressing in radial sealing ring at drive pinion - AR35.31-P-0530-06GH
- Replace radial sealing ring at drive pinion gear (with rear axle differential installed) - AR35.31-P-0530GH
- Pressing out and pressing in radial sealing ring on left of rear axle housing - AR35.31-P-0545-01GH
- Pressing out and pressing in radial sealing ring on right of rear axle housing - AR35.31-P-0545-02GH
- Replace radial sealing rings on side of rear axle center assembly - AR35.31-P-0545GH
- Maintenance