Maintenance Service Reminder Reset - Procedure 15
NOTE:
For reset using the Star Diagnosis tool, see Procedure 17 .
| Step | Adjust | Additional Information |
|---|---|---|
| 1 | Close engine hood, trunk lid and doors | |
| 2 | Turn key in ignition switch to position "1" | The standard display (kilometer counter) must appear in the multifunction display (A1p13), if necessary press the scroll forward button repeatedly (S110s1) |
| 3 | Press the system selection button (S110s3) repeatedly until the menu item "trip" is highlighted in the multifunction display (A1p13) | I"Trip" remains selected for approx. 5 s. Operation step 3 must be carried out within this time |
| 4 | Press Accept phone call (S111s3) button first and hold, then within 1 second also press the O K (S110s6) and hold it | Keep both buttons (S111s3, S110s6) pressed for approx. 5sec: The A1p13 workshop menu with the indices "vehicle data", "dynamometer test" and "ASSYST PLUS" appear in the multifunction display |
| 5 | Press the scroll forward button (S110s1) repeatedly until "ASSYST PLUS" is highlighted, and confirm selection with the OK (S110s6) button | The multifunction display (A1p13) shows the "Service data", "Full service" and "Oil measurement" tabs |
| 6 | Press scroll forward button (S110s1) in order to store the "Full Service" with the highlighter and confirm the selection with the OK (S110s6) button | The multifunction display (A1p13) shows the current service items and "Confirm service" |
| 7 | Press the scroll forward button (S110s1) repeatedly until "Confirm service" is highlighted, and confirm selection with the OK (S110s6) button | The multifunction display (A1p13) shows "Oil qual. 229.5" and "Serv. carried out?" |
| 8 | Press the scroll forward button (S110s1) until "yes" is highlighted, and confirm selection with the OK (S110s6) button | "No take-back possible" appears in the multifunction display (A1p13) |
| 9 | Press the scroll forward button (S110s1) until "Confirm" is stored with the highlighter and confirm selection with the OK (S110s6) button | "Full service carried out" appears in the multifunction display (A1p13) |
| 10 | Press OK button (S110s6) and "Back" button (S110s4) repeatedly until the standard display (kilometer counter) appears in the multifunction display (A1p13) | |
| 11 | Turn key in ignition lock to position "0" |