Blind Spot Monitoring (BSM) Warning Indicator Light Inspection
- Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0] ).
- Remove the following parts:
- Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION ).
- Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION ).
- Power outer mirror (See POWER OUTER MIRROR REMOVAL/INSTALLATION ).
- Outer mirror glass (See OUTER MIRROR GLASS REMOVAL ). (See OUTER MIRROR GLASS INSTALLATION ).
- Verify that the continuity between blind spot monitoring (BSM) warning indicator light connector terminals is as indicated in the table.
- If not as indicated in the table, replace the power outer mirror. (See POWER OUTER MIRROR REMOVAL/INSTALLATION ).