Inspection and Verification

Verify the customer concern.

Visually inspect for obvious signs of mechanical or electrical damage.

Visual Inspection Chart

VISUAL INSPECTION CHART

Mechanical	Electrical
Multi-function switch Ignition switch	Battery junction box (BJB) fuse 9 (40A) Smart junction box (SJB) Circuitry

If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
NOTE:
- Make sure to use the latest scan tool software release.
If the cause is not visually evident, connect the IDS or equivalent tester to the data link connector (DLC) and select the vehicle to be tested from the IDS or equivalent tester menu.
NOTE:
- The vehicle communication module (VCM) LED prove-out confirms power and ground from the DLC are provided to the VCM.
If the IDS or equivalent tester does not communicate with the VCM:
- Check the VCM connection to the vehicle.
- Check the IDS or equivalent tester connection to the VCM.
- See PINPOINT TEST 8: NO MODULE/NETWORK COMMUNICATION - NO POWER TO THE DIAGNOSTIC TOOL , to diagnose no communication with the scan tool.
If the scan tool does not communicate with the vehicle:
- Verify the ignition key is in the ON position.
- Verify the scan tool operation with a known good vehicle.
- See SYMPTOM TROUBLESHOOTING CHART - COMMUNICATIONS NETWORK , to diagnose no response from powertrain control module.
Carry out the network test:
- If the scan tool responds with no communication for one or more modules, see SYMPTOM TROUBLESHOOTING CHART - COMMUNICATIONS NETWORK , .
- If the network test passes, retrieve and record the continuous memory diagnostic trouble codes (DTCs).
Clear the continuous DTCs and carry out the self-test diagnostics for the SJB.
If the DTCs retrieved are related to the concern, see SMART JUNCTION BOX (SJB) DIAGNOSTIC TROUBLE CODE (DTC) INDEX , . For all other DTCs, see DIAGNOSTIC TROUBLE CODE (DTC) INDEX - B, C AND U CODES ,
If no DTCs related to the concern are retrieved, see SYMPTOM TROUBLESHOOTING CHART - WIPERS AND WASHERS , .

Smart Junction Box (SJB) Diagnostic Trouble Code (DTC) Index

SMART JUNCTION BOX (SJB) DIAGNOSTIC TROUBLE CODE (DTC) INDEX

DTC	Description	Source	Action
B1359	Ignition RUN/ACC Circuit Failure	Smart junction box (SJB)	see PINPOINT TEST 2: DTC B1359 -- IGNITION RUN/ACC CIRCUIT FAILURE OR NO POWER IN ACC .
B1555	Ignition RUN Circuit Failure	Smart junction box (SJB)	see PINPOINT TEST 3: DTC B1555 -- IGNITION RUN CIRCUIT FAILURE OR NO POWER IN RUN .

For a complete list of SJB DTCs, see DIAGNOSTIC TROUBLE CODE (DTC) INDEX - B, C AND U CODES , .