Seat Belt Inspection: ELR
CAUTION:
- If the load limiter mechanism operates, the belt will no longer withdraw and retract normally. Replace the belt if the load limiter mechanism operates.
- Verify that the belt can be pulled out smoothly, and that it moves smoothly when wound.
- Verify that the retractor locks when the belt is quickly pulled.
- Remove the retractor. (See SEAT BELT REMOVAL/INSTALLATION .)
- Hold the retractor as it would be installed.
- Slowly incline the retractor while pulling out the belt.
- Verify that the retractor locks at approximately 30°
inclination.
- If not as specified, replace the seat belt.