LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> B4000 Base, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> A/C Compressor >> HVAC System >> Heater Control Switch Removal/Installation

Heater Control Switch Removal/Installation

  1. Remove the heater control unit; see HEATER CONTROL UNIT REMOVAL/INSTALLATION .
  2. Gently pull and remove the blower motor knob.
  3. Release the three clips and remove the switch.
    Fig 1: Removing Heater Control Switch
    G01935144Courtesy of MAZDA MOTORS CORP.
  4. Gently pull and remove the function selector knob.
  5. Release the clips and remove the function selector switch.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals