LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> 3 i, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Lighting System >> Inboard Light Removal/Installation >> Notes

Inboard Light Removal/Installation: Notes

  1. Disconnect the negative battery cable.
  2. Remove the trunk lid trim. (4 door) (See TRUNK LID TRIM REMOVAL/INSTALLATION .)
  3. Remove the service hole cover. (5 door)
  4. Remove in the order indicated in the table.
    Fig 1: Inboard Light With Torque Specifications
    G02566966Courtesy of MAZDA MOTORS CORP.
    REMOVAL ORDER OF INBOARD LIGHT

    Removal Order Part
    1 Nut
    2 Bracket
    3 Connector
    4 Inboard light (See Inboard Light Installation Note .)
    5 Socket
    6 Back-up light bulb
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals