LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> B2300 Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Ignition System >> Engine Controls [Removal & Installation] >> Variable Valve Timing System >> Variable Valve Timing Actuator >> Removal & Installation (Miata)

Removal & Installation (Miata)

  1. Disconnect the negative battery cable.
  2. Disconnect Oil Control Valve (OCV) harness connector. See Fig 1.
  3. Remove OCV. See Fig 1.
  4. To install, reverse removal procedure. See TORQUE SPECIFICATIONS .
Fig 1: Removing & Installing Oil Control Valve - Miata
G00264425Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals