LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> 6 i, Standard >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Instrument Cluster Inspection >> Using the SSTs (WDS or equivalent)

Using the SSTs (WDS or equivalent)

CAUTION:
  • If the engine speed exceeds the allowable range, the engine could be damaged. Therefore, when inspecting the tachometer, do not allow the engine speed to exceed the allowable range indication on the tachometer.
  1. Connect the SSTs  (WDS or equivalent) to the vehicle DLC-2 16-pin connector.
  2. Access and monitor PIDs by SSTs  (WDS or equivalent).
    Fig 1: Locating DLC-2 16-Pin Connector
    G01931466Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals