DTC C1118 (82): Engine Control System, Torque Reduction Request Signal Line

CAUTION:

• When attaching the tester lead to the ABS/TCS HU/CM or the ABS/TCS HU/CM harness connector, the SST (49 G066 001) must be used. (See ABS/TCS HU/CM (WITH TCS) OR ABS HU/CM (WITHOUT TCS) SYSTEM INSPECTION .)
• When attaching the tester lead to the PCM, the SST must be used.

NOTE:

• If a malfunction of the torque reduction request line occurs, DTC is memorized in the PCM.

Fig 1: DTC: B1118 [KL-ZE] - Detection Condition & Possible Causes (1 Of 2)

Courtesy of MAZDA MOTORS CORP.

Fig 2: DTC: B1118 [KL-ZE] - Detection Condition & Possible Causes (2 Of 2)

Courtesy of MAZDA MOTORS CORP.

Fig 3: DTC: B1118 [KL-ZE] - Diagnostic Procedure Steps 1-4

Courtesy of MAZDA MOTORS CORP.

Fig 4: DTC: B1118 [KL-ZE] - Diagnostic Procedure Steps 5-7

Courtesy of MAZDA MOTORS CORP.

Fig 5: DTC: B1118 [KJ] - Detection Condition & Possible Causes

Courtesy of MAZDA MOTORS CORP.

Fig 6: DTC: B1118 [KJ] - Diagnostic Procedure Step 1

Courtesy of MAZDA MOTORS CORP.

Fig 7: DTC: B1118 [KJ] - Diagnostic Procedure Steps 2-7

Courtesy of MAZDA MOTORS CORP.

Fig 8: DTC: B1118 [KJ] - Diagnostic Procedure Steps 8-11

Courtesy of MAZDA MOTORS CORP.