LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> 626 ES, 2.0 C, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing >> Engine Sensors & Switches >> Camshaft Position (CMP) Sensor >> Millenia 2.3L

Millenia 2.3L

  1. CMP sensor is located on right front of engine. Remove CMP sensor, leaving electrical connector connected. Using analog voltmeter (or oscilloscope), connect negative lead to CMP sensor ground (CMP body or Black/Blue wire).
  2. With positive voltmeter lead, backprobe Blue/Red wire at CMP connector. Turn ignition on. Rotate CMP shaft and observe voltage reading. Voltmeter should indicate a voltage pulse (5 volts) per revolution. Replace CMP sensor as necessary.
scientia non olet · About LEMON Manuals