Automatic Locking Wheel Hub: Removal/Installation: Notes

1. Jack up the front of the vehicle and support it with vehicle stands.
2. Remove the wheel and tire assemblies.
3. Remove in the order shown in the figure, and the following list. See step  1 .
4. Install in the reverse order of removal, referring to Installation Notes.

Fig 1: Automatic Locking Wheel Hub

Courtesy of MAZDA MOTORS CORP.

1. Retainer (1)
2. Automatic locking hub assembly (2)
   • See AUTOMATIC LOCKING HUB ASSEMBLY  Installation Note
3. Axle Shaft Spacers (3)
   • See SPACER  Removal Note
4. Cam assembly (4)
   • See CAM ASSEMBLY  Installation Note
5. Locking key (5)
   • See LOCKING KEY  Removal Note
   • See LOCKING KEY  Installation Note
6. Adjusting nut (6)
   • See ADJUSTING NUT  Installation Note
7. Disc plate (7)