LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1993 >> Protege DX, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Carburetor (B2200) >> Reassembly (All Parts)

Reassembly (All Parts)

  1. To reassemble, reverse disassembly procedure using NEW gaskets. DO NOT  install spring pin in front of mixture screw until idle mixture has been adjusted with engine running. Before installing air horn on main body, adjust float level and float drop. Install NEW "O" ring on M/C solenoid and coat "O" ring with gasoline.
  2. After reassembly and before installing carburetor, adjust choke pull-off diaphragm, fast idle cam (throttle opening angle), fast idle cam (choke opening angle), choke unloader, secondary throttle valve and accelerator cable.
  3. After installing carburetor, adjust curb (hot) idle speed, fast (cold) idle speed and idle mixture. See ADJUSTMENTS article.
scientia non olet · About LEMON Manuals