B2200 (CARBURETED)
- Warm engine to operating temperature. Connect tachometer. Operate engine at idle. Using voltmeter, backprobe Light Green/Red wire terminal of idle switch connector. See Fig 1 .
- Increase engine speed to more than 2000 RPM. Gradually decrease engine speed. If voltage is not as specified in the THROTTLE SWITCH VOLTAGE TEST (B2200 CARBURETED) table, turn idle switch adjusting screw until voltage is within specification.
THROTTLE SWITCH VOLTAGE TEST (B2200 CARBURETED)
| RPM | Volts |
|---|---|
| 825 (Idle) | About 12 |
| About 1000 or more | Less Than 1.5 |