LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1990 >> 626 DX, 2.2 1, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Body >> Removal & Installation (RX7 Turbo)

Removal & Installation (RX7 Turbo)

  1. Relieve fuel pressure. Drain coolant from radiator. Remove intercooler and oil filler pipe. Disconnect accelerator and cruise control cables. Disconnect necessary electrical connectors. Remove Accelerated Warm-Up (AWS) Solenoid valve.
  2. Remove vacuum tubes and coolant hoses. Remove air intake pipe, throttle body and dynamic chamber. To install, reverse removal procedure. See TORQUE SPECIFICATIONS  table.
scientia non olet · About LEMON Manuals