Pinpoint Test N : DTC U0155: Notes
Refer to Module Communications Network for schematic and connector information.
Normal Operation and Fault Conditions
The IPC, GSM and TRCM use information contained in messages on the HS-CAN.
NOTE:
If a GSM self-test is to be performed, make sure the drivers door is closed and locked.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0155 | Lost Communication With Instrument Panel Cluster (IPC) Control Module | This DTC sets if the TRCM and/or the GSM does not receive some or all of an expected message from the IPC. |
Possible Sources
- Connectors damaged or pushed-out terminals, circuitry open, shorted to power or shorted to ground
- BJB fuse 12 (7.5A)
- IPC