LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2016 >> Navigator Select, RWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seating System >> Removal And Installation >> Seat - Front >> Removal

Seat - Front: Removal

NOTE: Navigator driver seat shown, all others similar.

  1. 1.

    Depower the SRS. Refer to SRS Depowering and Repowering in the General Procedures portion of Supplemental Restraint System .
    NOTE: To avoid damage, do not pull from the inboard side of the front seat cushion panel shield.

  1. 2.
    Remove the front seat cushion panel shield.

    1. 1.

      Release the upper retaining clips working from the outboard side toward inboard side.

    1. 2.

      Release the lower retaining clips.
GFD32269Courtesy of FORD MOTOR COMPANY

  1. 3.

    Detach the wire harness locator from the seat track.
GFD32270Courtesy of FORD MOTOR COMPANY

  1. 4.

    Disconnect the seat harness electrical connectors.

    1. 1.

      Release the locking button and disconnect the side airbag electrical connector.

    1. 2.

      Release the locking tab(s) and rotate the connector position assurance lever(s) fully.

    1. 3.

      Slightly tip the connector(s) away and disconnect.
GFD32271Courtesy of FORD MOTOR COMPANY

  1. 5.

    Remove the seat track front cover.
GFD32272Courtesy of FORD MOTOR COMPANY

  1. 6.

    Remove the seat track rear covers.
GFD32273Courtesy of FORD MOTOR COMPANY
    NOTE: Follow the unique instructions or graphics for this step in the installation.

  1. 7.
    Remove the bolts and the front seat.
GFD32274Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals