Front Control/Display Interface Module (FCDIM): Removal
WARNING: This page is about a different car, the 2013 Ford Focus and 2012 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Refer to: HEALTH AND SAFETY PRECAUTIONS .
- Upload the FCDIM configuration information to the scan tool by following the scan tool on screen instructions.
- Remove the ACM.
Refer to: Audio Front Control Module (ACM)
- Torque : 1.3 Nm
- Torque : 2 Nm
WARNING:
Before beginning any service procedure in this service information, refer to Safety Warnings in
SERVICE INFORMATION
General Information. Failure to follow this instruction may result in serious personal injury.
NOTE:
If installing a new module, it is necessary to upload the module configuration information to the scan tool prior to removing the module. This information must be downloaded into the new module after installation.
NOTE:
This step is only necessary when installing a new component.