LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2011 >> MKX AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows And Glass - Glass, Frames And Mechanisms >> General Procedures >> Window Motor Initialization >> De-Initialization procedure

De-Initialization procedure

NOTE: The front window motor must be reset to its original factory settings first, then carry out the following de-initialization procedure.
  1. Turn the ignition key ON.
  2. Operate the window control switch in one-touch mode and remove power from the window motor while the window is moving  by one of the following methods:
    1. Disconnect the vehicle battery cable while the window is moving  .
    2. Disconnect the window motor connector while the window is moving  .
    3. Remove the LH or RH front window motor fuse while the window is moving  .
  3. This will de-initialize the window motor and reset the window motor to its original factory settings.
  4. Carry out the initialization procedure to turn the one-touch-up feature on.
scientia non olet · About LEMON Manuals